Latest Blog
- INTRODUCCIÓ DE PRODUCTE
Descripció del detall:
Automobile front and rear bumpers are a kind of automobile accessories, and automobile front and rear bumpers generally have bending parts. In the production process, automobile front and rear bumpers are generally processed by injection molds. The existing injection molding molds are used when processing bumpers. The main disadvantages are as follows: 1. Existing processing molds generally feed in the bending part at one end and exhaust at the other end. This processing method has slow injection efficiency and uneven injection; 2. Inside the processing mold The injection channel cannot be heated, which will easily cause the plastic melt in the injection channel to condense before it reaches the cavity. The injection channel is prone to blockage and injection cannot be completed; 3. It is easy to mold with the above-mentioned one-end bending part feeding structure As a result, the gas in the cavity cannot be discharged in time, resulting in pores in the processed bumper, and even local scorching, flow marks, lack of material, and suction in the bumper under high temperature and high pressure gas, resulting in defects such as deformation of the workpiece , The use effect is poor.
Mold name: Automotive front bumper mould, car front bumper mold wholesale
Descripció de producte:
1. Material del producte: PP
2. Mida: depèn del disseny de mostra / 3D
3. Disponible per personalitzar
Motlle d'acer | S50C, P20.H13,718H, S136,2738,2344, etc. |
Duresa de l'acer | 28-50HRC |
Base de motlle | Standard Mold Base, LKM,etc |
Corredor de motlles | Corredor calent |
Cavitat del motlle | Única cavitat |
Programari de disseny: | CAD, UG, PROE, Soliworks |
Equip de processament: | CNC, EDM, Drill machine, Graving,Wire cutting |
Màquina de prova | Depend on mould size, from 1800t-3000t |
porta | Direct gate, Side gate, etc. |
Expulsor | Pin d'expulsió, bloc d'expulsió, |
Vida útil del motlle | Diferent acer amb diferent vida útil del motlle |
Estàndard | Estàndard xinès, HACO, DME, etc. |
Embalatge i lliurament:
Detalls d'empaquetatge: | Pel·lícula de plàstic segellada i caixa de fusta PLY |
Port d'enviament: | Port de Ningbo, Xina |
Temps de lliurament: | 85 ~ 100 dies després de rebre el pagament. (depèn del motlle) |