+ 86-574-56118361

EN
سڀ درجا بندي

پلاسٽڪ انجيڪشن مولڊنگ لاءِ ون اسٽاپ سروس فراهم ڪندڙ

گهر>شين>گاڏين جو ٺهيل

  • https://www.china-mould-maker.com/upload/product/1585553227439759.jpg

گاڏين جي سامهون بمپر ٺهيل

اسان سان رابطو ڪريو

  • PRODUCT INTRODUCTION

تفصيل وضاحت


Automobile front and rear bumpers are a kind of automobile accessories, and automobile front and rear bumpers generally have bending parts. In the production process, automobile front and rear bumpers are generally processed by injection molds. The existing injection molding molds are used when processing bumpers. The main disadvantages are as follows: 1. Existing processing molds generally feed in the bending part at one end and exhaust at the other end. This processing method has slow injection efficiency and uneven injection; 2. Inside the processing mold The injection channel cannot be heated, which will easily cause the plastic melt in the injection channel to condense before it reaches the cavity. The injection channel is prone to blockage and injection cannot be completed; 3. It is easy to mold with the above-mentioned one-end bending part feeding structure As a result, the gas in the cavity cannot be discharged in time, resulting in pores in the processed bumper, and even local scorching, flow marks, lack of material, and suction in the bumper under high temperature and high pressure gas, resulting in defects such as deformation of the workpiece , The use effect is poor.


Mold name: Automotive front bumper mould, car front bumper mold wholesale

شئ جو بيان:

1. پيداوار جو مواد: پي پي

2. سائيز: نمونہ / 3D ڊزائين تي منحصر
3. لاء ٺاهيل لاء

 

مٽي اسٽيل

ايس اي سي سي، پي 50 ه20،13,718H، S136,2738,2344،XNUMX،XNUMX، وغيره

اسٽيل جي سختي

28-50HRC

مٽي بنياد

Standard Mold Base, LKM,etc

مٽي رنر

 گرم ڊوڙندڙ

اچار جي ڪيوري

واحد نلڪيون

خاڪي سافٽ ويئر

سي ڊي، يو جي، پرو، سولي ڪم

پروسيسنگ جو سامان:

CNC, EDM, Drill machine, Graving,Wire cutting

چڪاس جي مشين

Depend on mould size, from  1800t-3000t

گيٽ

Direct gate, Side gate,  etc.

تجزيو

انيڪٽر پن ، ايڏو بلاڪ ، 

مٽي لائفائم

مختلف اسٽيل مختلف اسٽيل جي حياتي سان

معياري

چيني معياري، ايڇ اي سي، ڊي ايم اي، وغيره

 

 

 

پيڪنگ ۽ پهچائڻ:

پيڪنگ جا تفصيل:

پلاسٽڪ فلم سيل ۽ پي ايل ڊي جي دٻي واري دٻي

شپنگ پورٽ:

ننگبو بندر، چين

پهچائڻ جو وقت:

ادائيگي حاصل ڪرڻ کانپوء 85 ~ 100 ڏينهن. (انحصار تي ٺهيل)

 


اسان سان رابطو ڪريو