+ 86-574-56118361

EN
Vse kategorije
  • Samodejni kalup

  • Kalup za gospodinjske aparate

  • Elektronski in precizni kalupi

  • Pakiranje Kalup

  • Vse klasifikacije

Oblikovanje in izdelava kalupov za brizganje plastike


Vaš projekt kalupa je za nas zelo pomemben, naš natančen postopek in iskrena storitev pa zagotavlja, da lahko v najkrajšem roku in po pravi ceni dostavimo najboljši končni model. To ni samo en projekt kalupa, ampak tudi začetek našega lepega odnosa.

o nas


MINGYU MOLD --- Biti vaš zanesljiv proizvajalec in dobavitelj kalupov za brizganje!

MINGYU MOLD je profesionalno podjetje za oblikovanje in proizvodnjo kalupov za brizganje na Kitajskem. Ima več kot 25 let izkušenj z vrstami kalupov za brizganje, kot so kalupi za brizganje avtomobilskih delov, kalupi za gospodinjske aparate, električni in natančni kalupi, kalupi za tanke stene itd.

Zadovoljstvo in zaupanje kupcev sta motivacija za naša nenehna prizadevanja.

dobrodošli v stik z nami!

Preberi več

Naše prednosti in storitve


Blog

več
  • Načelo in sestava kalupov pri brizganju
    2021-05-17

    Injection molds are parts that give plastic shapes and dimensions during molding. Although the structure of the mold may vary widely due to the variety and performance of plastics, the shape and structure of plastic products, and the type of injection machine, the basic structure is the same. The injection mold is mainly composed of three parts: the gating system, the molded parts and the structural parts. Among them, the pouring system and molded parts are the parts that are in direct contact with the plastic and change with the plastic and the product. They are the most complex and the most variable parts in the plastic mold, requiring the highest processing finish and precision.

  • Nekatere zahteve za standardizirano izdelavo kalupov za brizganje
    2021-04-14

    In order to improve the quality of plastic molds, minimize mold quality complaints, and meet customer needs when producing molds, we summarize and summarize common problems in mold manufacturing, establish standards, and implement them as required. According to our production experience, we summarize the production of standard molds into the following 30 points: 1. For mold blanks smaller than 2020, a prying pit is required between the a and b plates; for mold blanks larger than 2020, all templates including thimble plates must be prying pits; 2. Exhaust grooves should be machined on the guide post and guide sleeve of the mold blank to prevent the guide post and guide sleeve from straining; 3. There should be no sharp corners on the mold, and chamfering is required. Except for specially specified places; 4. The inner mold and mold parts must not be welded without consent; 5. Exhaust grooves must be opened at the appropriate position on the periphery of the mold product. For the specifications of the exhaust grooves, please refer to the mold design manual;

  • Tehnologija brizgalnega kalupa za brizganje plesni
    2021-03-09

    Hot runner gating system can be understood as an extension of injection molding machinery. The function of the hot runner system is to deliver the thermoplastic melt to the vicinity of the molding die or directly into the die adiabatically. The hot runner can be heated independently, but thermally insulated in the injection mold, so that it can individually compensate for the heat loss caused by contact with the "cold" mold. Hot runner molds have been successfully used to process various plastic materials. Almost all plastic materials that can be processed with cold runner molds can be processed with hot runner molds.

Pogosta vprašanja

več
  • Kako dolgo bo trajalo dostavo?
    Odvisno od načina dostave, lahko dostavo opravimo z letalskim prevozom, pošiljanjem po morju, zračni prevoz traja 1 teden in 20-30 dni po morju.
  • Kdo je odgovoren za dostavo plesni?
    Na podlagi pogajanj med ponudbo je na voljo veliko pogojev za dobavo, FOB, CIF, CFR itd.
  • Kdo je odgovoren za stroške dostave vzorca?
    Za dostavo vzorcev običajno odgovarja proizvajalec kalupa za brizganje; ta strošek bi povzročil, da bi proizvajalec kalupov iz umetnih mas poskusil čim hitreje uspeti projekt brizganja kalupov.
  • Kaj bo na voljo skupaj z vzorci?
    Za boljše odvajanje stanja kalupa, skupaj z vzorci, je treba predložiti vrata / tekač, poročilo o parametrih brizganja, poročilo o dimenzijah oblikovanega dela.
  • Kdo je odgovoren za preskus plastične smole iz plesni?
    Material, ki ga je enostavno dobiti na lokalni ravni, naj pripravi dobavitelj kalupa za brizganje, kupci pa morajo priskrbeti nekaj posebne smole, ki je ni mogoče kupiti na Kitajskem.
  • Kako zagotoviti resnično uporabljeno jeklo?
    Na splošno jeklo, ki ga uporabljajo kitajski dobavitelji kalupov, običajno kupujejo pri LKM, LKM je največji dobavitelj kalupa / jekla iz kalupa v Aziji, na voljo so certifikati za jeklo in toplotno obdelavo.