Experience on Plastic Injection Molding
Firstly, MINGYU MOLD company is a professional injection mold manufacturer in China. With more than 25 years experience on Automobile mold , home appliance mold, packing mold, electrical parts mold and precision mold ,etc.
Based on the experience on the plastic injection molding, MINGYU is able to offer the one-stop service, kinds of plastic injection molding machine, mold, automation robot, auxiliary machines, etc. If you are just new in this business and want to set a new plastic molding factory, MINGYU will be your ideal choose.
Customer's satisfication and trust is the motivation of our continous efforts.
welcome to contact with us!
We insist on recommending suitable steel to customers according to different product materials and mold, Such as P20,718H,718HH,H13,Assab 2344,Groditzl 2738,NAK80,S136,etc.
Advanced processing equipment to ensure the processing precision and efficiency of each process, for our mold quality and delivery to provide effective guarantee.
We have experienced mould design team, strive to give customers reasonable mould structure, efficient cooling water, stable and short mould production cycle.
Proper injection molding machine ensures the accuracy and reliability of every mold test.We will have photos and video records for each mold trial for customers to check. Samples will be sent for free twice for each mold.
Each mold will be cleaned before shipment, and appropriate anti-rust measures and protect will be taken. Railway transportation, sea shipment and air transportation are all available according to customer's Requirement.
Provide the necessary guidance and suggestions after customer receiving the mold, and help customer start the production. Customer's long-term satisfaction and trust is our service tenet.
MINGYU is able to supply the plastic injection molding machine together with the mold. For example, servo motor injection molding machine 100ton ~3000ton, high speed injection molding machine for the thin-wall packing mold.
By this way, MINGYU can help customers start the business easily and smoothly.
Thermoplastics are characterized by expansion after heating and contraction after cooling. Of course, the volume will shrink after pressurization. In the injection molding process, the molten plastic is first injected into the mold cavity. After the filling is completed, the molten material cools and solidifies. When the plastic part is taken out of the mold, shrinkage occurs. This shrinkage is called forming shrinkage. During the period from when the mold is taken out to stabilize the plastic part, there will still be slight changes in size. One change is to continue to shrink. This shrinkage is called post-shrinkage.
Injection molds are parts that give plastic shapes and dimensions during molding. Although the structure of the mold may vary widely due to the variety and performance of plastics, the shape and structure of plastic products, and the type of injection machine, the basic structure is the same. The injection mold is mainly composed of three parts: the gating system, the molded parts and the structural parts. Among them, the pouring system and molded parts are the parts that are in direct contact with the plastic and change with the plastic and the product. They are the most complex and the most variable parts in the plastic mold, requiring the highest processing finish and precision.
In order to improve the quality of plastic molds, minimize mold quality complaints, and meet customer needs when producing molds, we summarize and summarize common problems in mold manufacturing, establish standards, and implement them as required. According to our production experience, we summarize the production of standard molds into the following 30 points: 1. For mold blanks smaller than 2020, a prying pit is required between the a and b plates; for mold blanks larger than 2020, all templates including thimble plates must be prying pits; 2. Exhaust grooves should be machined on the guide post and guide sleeve of the mold blank to prevent the guide post and guide sleeve from straining; 3. There should be no sharp corners on the mold, and chamfering is required. Except for specially specified places; 4. The inner mold and mold parts must not be welded without consent; 5. Exhaust grooves must be opened at the appropriate position on the periphery of the mold product. For the specifications of the exhaust grooves, please refer to the mold design manual;
B3, Moju taulaga, Ninghai, Ningbo, Saina
EN
ES
PT
AR
DE
TR
FR
