+ 86-574-56118361

EN
Categories All

Mofani oa Ts'ebeletso e le 'ngoe Bakeng sa Mould Ente ea Plastiki

Lehae>Tšebeletsong ea Rōna e>Pontšo ea Nyeoe ea Morero

Round lijo setshelo hlobo (leboteng tšesaane)

Nako: 2019-11-08 Hits: 477

Project name: Round food packing container mould,thin wall round container mould,plastic food packing box mold

 

Recently, we Mingyu Mould company made a round food packing container mold for a customer from Dubai. It is a thin wall mold,wall thickness is only 0.38mm. it need to be run by high speed injection molding machine.


 round food container -2


Lintlha tsa motheo tsa karolo:

  •  Part name: Round food containe

  • Karolo ea boitsebiso:PP (high MFI,food grade)

  •  Boholo ba karolo:Top dia.123mm,bottom dia.85mm, height 74mm, wall thickness 0.38mm. 

  • Karolo ea 'mala: transparent or black

  • Buka: 500ml

 

Lintlha tsa motheo tsa hlobo:

·       Mold base steel: P20

·       Mould cavity & core tšepe: 2344

·       Mold cavity number: 4 cavities

·       Mold gate type: 1 pin point hot runner for each cavity

 

After receiving the sample from customer, we know it is a thin wall product,the wall thickness is only 0.38mm after measured, which is much different to normal storage box mold. it has a higher requirement of the mold steel, processing precision,hot runner system,cooling system, etc. 

For the mold steel, we used 2344 steel after heat treatment for mold core & cavity, and use high speed carving machine to process it. 

For the hot runner system, we used a good and stable chinese brand pin point hot runner for each cavity. of course, YUDO hot runner is also optional.

For the ejecting way, we used the air ejection system, there will be air pins on the cavity side, core side. For running this 4 cavities 500ml round container mold, 250ton high speed injection molding machine is needed. the mold can run automatically with the air ejection system.  Of course, usually, most customer used the robot to pick up the final product and put on a belt conveyor, which is more automatically,safe, and clean. 

 

Ka tlase ke setšoantšo sa 3D sa sehlahisoa sa ho qetela se amohetsoeng.

 

 

Mingyu hlobo e entse moralo oa hlobo mme e romela ho moreki bakeng sa ho hlahloba le ho netefatsa. metako ea ho qetela ea hlobo ea 3D e tjena ka tlase:

round food container mold drawing-1 round food container mold drawing-2 round food container mold drawing-3 


Below is pictures of  the final finished mold, mold packing.

round food container mold

  round food container mold-2