+ 86-574-56118361

EN
sadaya Kategori

Hiji-eureun Service Provider Pikeun Plastik suntik Molding

Imah>Service kami>Project Case Tembongkeun

Wadah kadaharan buleud (Tembok ipis)

Waktos: 2019-11-08 hits: 463

Project name: Round food packing container mould,thin wall round container mould,plastic food packing box mold

 

Recently, we Mingyu Mould company made a round food packing container mold for a customer from Dubai. It is a thin wall mold,wall thickness is only 0.38mm. it need to be run by high speed injection molding machine.


 round food container -2


Inpormasi bagian dasar:

  •  Part name: Round food containe

  • Bahan bagian:PP (high MFI,food grade)

  •  Ukuran bagian:Top dia.123mm,bottom dia.85mm, height 74mm, wall thickness 0.38mm. 

  • Warna bagian: transparent or black

  • Volume: 500ml

 

Inpo dasar kapang:

·       Mold base steel: P20

·       Rongga kapang & baja inti: 2344

·       Mold cavity number: 4 cavities

·       Mold gate type: 1 pin point hot runner for each cavity

 

After receiving the sample from customer, we know it is a thin wall product,the wall thickness is only 0.38mm after measured, which is much different to normal storage box mold. it has a higher requirement of the mold steel, processing precision,hot runner system,cooling system, etc. 

For the mold steel, we used 2344 steel after heat treatment for mold core & cavity, and use high speed carving machine to process it. 

For the hot runner system, we used a good and stable chinese brand pin point hot runner for each cavity. of course, YUDO hot runner is also optional.

For the ejecting way, we used the air ejection system, there will be air pins on the cavity side, core side. For running this 4 cavities 500ml round container mold, 250ton high speed injection molding machine is needed. the mold can run automatically with the air ejection system.  Of course, usually, most customer used the robot to pick up the final product and put on a belt conveyor, which is more automatically,safe, and clean. 

 

Di handap ieu gambar 3D tina produk disatujuan ahir.

 

 

Mingyu kapang tuh desain kapang jeung ngirim ka customer pikeun mariksa jeung confirming. gambar kapang 3D ahir nyaéta saperti kieu:

round food container mold drawing-1 round food container mold drawing-2 round food container mold drawing-3 


Below is pictures of  the final finished mold, mold packing.

round food container mold

  round food container mold-2