+ 86-574-56118361

EN
zonke iindidi
  • Auto zomngundo

  • Isixhobo seKhaya

  • Elektroniki kunye Precision Ikubumbe

  • Ukupakisha zomngundo

  • Lonke ulwahlulo

Zeplastiki Inaliti zomngundo Design & kwemveliso


Iprojekthi yakho yokubumba ibaluleke kakhulu kuthi, kwaye inkqubo yethu eneenkcukacha kunye nenkonzo enyanisekileyo iqinisekisa ukuba sinako ukuhambisa isikhunta esigqityiweyo ngexesha elifanelekileyo kunye nexabiso elifanelekileyo. Ayisiyiyo kuphela projekthi yokubumba enye, kodwa sisiqalo solwalamano lwethu oluhle.

ngathi


I-MINGYU MOLD-- Ukuba ngumenzi wakho wenaliti ethembekileyo kunye nomthengisi!

MINGYU UMold uyilo inaliti inaliti nokuvunda kunye nenkampani lemveliso e China. It has iminyaka engaphezu kwama-25 yamava kwiintlobo ngenaliti ngumngundo, ezifana Automotive iindawo inaliti sokubumbela, Ekhaya isixhobo isixhobo sokubumbela, zombane kunye ngqo ukungunda, udonga obhityileyo ukupakisha ukungunda, njl.

Ukwaneliseka kwabaThengi kunye nokuthembela kukukhuthaza iinzame zethu eziqhubekayo.

Wamkelekile ukuba uqhagamshelane nathi!

Funda ngokugqithisileyo

Izinto eziluncedo kunye neNkonzo yethu


Blog

Kaninzi
  • Umgaqo kunye nokwakheka komngundo ekubumbeni ngenaliti
    2021-05-17

    Injection molds are parts that give plastic shapes and dimensions during molding. Although the structure of the mold may vary widely due to the variety and performance of plastics, the shape and structure of plastic products, and the type of injection machine, the basic structure is the same. The injection mold is mainly composed of three parts: the gating system, the molded parts and the structural parts. Among them, the pouring system and molded parts are the parts that are in direct contact with the plastic and change with the plastic and the product. They are the most complex and the most variable parts in the plastic mold, requiring the highest processing finish and precision.

  • Ezinye iimfuno zokwenza isitofu sokubumba esisemgangathweni
    2021-04-14

    In order to improve the quality of plastic molds, minimize mold quality complaints, and meet customer needs when producing molds, we summarize and summarize common problems in mold manufacturing, establish standards, and implement them as required. According to our production experience, we summarize the production of standard molds into the following 30 points: 1. For mold blanks smaller than 2020, a prying pit is required between the a and b plates; for mold blanks larger than 2020, all templates including thimble plates must be prying pits; 2. Exhaust grooves should be machined on the guide post and guide sleeve of the mold blank to prevent the guide post and guide sleeve from straining; 3. There should be no sharp corners on the mold, and chamfering is required. Except for specially specified places; 4. The inner mold and mold parts must not be welded without consent; 5. Exhaust grooves must be opened at the appropriate position on the periphery of the mold product. For the specifications of the exhaust grooves, please refer to the mold design manual;

  • Inaliti ngumngundo imbaleki iteknoloji
    2021-03-09

    Hot runner gating system can be understood as an extension of injection molding machinery. The function of the hot runner system is to deliver the thermoplastic melt to the vicinity of the molding die or directly into the die adiabatically. The hot runner can be heated independently, but thermally insulated in the injection mold, so that it can individually compensate for the heat loss caused by contact with the "cold" mold. Hot runner molds have been successfully used to process various plastic materials. Almost all plastic materials that can be processed with cold runner molds can be processed with hot runner molds.

FAQ

Kaninzi
  • Kuya kuthatha ixesha elingakanani ukwenza ukuhanjiswa?
    Kuxhomekeke kwindlela yokuhanjiswa, ukuhanjiswa kunokwenziwa ngothutho lomoya, ukuthunyelwa kolwandle, kuthatha iveki enye ngokuhamba ngomoya, kunye neentsuku ezingama-1-20 ngolwandle.
  • Ngubani onoxanduva unikezelo ukungunda?
    Isiseko kuthethathethwano ngexesha locaphulo, iimeko zokuhanjiswa ezininzi ziyafumaneka, FOB, CIF, CFR, njl.
  • Ngubani onoxanduva lokuhambisa isampulu yeendleko?
    Ukuhanjiswa kwesampula ngokubanzi luxanduva lomenzi wenaliti yenaliti; le ndleko iya kuqhuba umenzi weplastiki wokubumba azame ukwenza ukuba iprojekthi yokubumba yenaliti iphumelele ngokukhawuleza.
  • Yintoni eya kubonelelwa kunye neesampulu?
    Ukwenza i-eva1uation engcono kwimeko yokubumba, kunye neesampulu, isango / imbaleki, ingxelo yeparamitha yokubumba yenaliti, ingxelo yenxalenye ebunjiweyo kufuneka ibonelelwe.
  • Ngubani onoxanduva resin uvavanyo zeplastiki?
    Izinto ezilula ukuzifumana ekuhlaleni kufuneka zilungiswe ngumthengisi wenaliti yenaliti, enye ye-resin ekhethekileyo engenakuthengwa e-China kufuneka inikezwe ngabathengi.
  • Uqinisekisa njani ukuba isinyithi esisetyenzisiweyo sisetyenzisiwe?
    Ngokubanzi, isinyithi esisetyenziswa ngababoneleli bokungunda baseTshayina zihlala zithengwa kwi-LKM, i-LKM yeyona nto inkulu yesiseko sokubumba / isinyithi somthengisi e-Asia, izatifikethi zonyango kunye nobushushu ziyafumaneka.